Dzus Bodywork Fastener Kit - Clip Style (Package of 6)
This 6 pack of Clip-type DZUS fasteners makes installation and disassembly of your race bodywork quick and easy. These clips also easily transfer from one set of bodywork to another in the future.
- Safely and quickly secure race bodywork together with these 1/4 turn D-ring style fasteners
- Sold in packs of 6
- Also available in Rivet-type
$54.95
Dzus Bodywork Fastener Kit - Rivet Style (Package of 6)
This 6 pack of Clip-type DZUS fasteners makes installation and disassembly of your race bodywork quick and easy. These clips also easily transfer from one set of bodywork to another in the future.
- Safely and quickly secure race bodywork together with these 1/4 turn D-ring style fasteners
- Sold in packs of 6
- Also available in Clip-type
$52.95
WOODCRAFT STANDARD SLIDER PUCK, BLACK
Replacement 1099 Universal Slider Puck- Black Plastic. This is the slider puck usable on all Woodcraft frame slider bases that use an 8mm retaining bolt (90% of all kits).
This puck is approximately 55mm long.
Please note: sold as single parts (not in pairs - please order x2 if needing to replace both sides).
$23.95
Black Eccentric Replacement Footpeg with Bolt
Black Eccentric Replacement Footpeg w/ FH bolt for the following models: ZX10R '06+,Tri 675 '06+, ZX6/636R '07+, BMW S1000RR, CBR250, DUC 696 series, 1199, 821, EX250/300, SV650 '03-11;'17, SV1000 All Yrs, Yam R1 '15, BRAMMO, Yam '15 R3, BMW S1000RR '15, Yam R6 '17, GROM '17
Please note: sold as single parts (not in pairs - please order x2 if needing to replace both sides).
$41.95
Replacement Clip-On Bar Tube Assembly, Standard (12") 7/8" - black
Standard Replacement Bar (12" long) in black. These bars are 7/8" diameter and are considered the standard size.
Please note: sold as single parts (not in pairs - please order x2 if needing to replace both sides).
$20.95
Replacement Clip-On Bar Tube Assembly, Extra Long (13.5") 7/8" - black
Extra Long Replacement Bar (13.5" long) in black. These bars are 7/8" diameter and 1.5 inches longer than our standard bars and are used for riders looking for extra long bars to accommodate Woodcraft hand guards or riders who want the option for some extra leverage. They are also standard on several Woodcraft clipon adapter plate kits.
Please note: sold as single parts (not in pairs - please order x2 if needing to replace both sides).
$21.95
Brake Pressure Switch - Coarse Thread, 10mm x 1.25"
These universal switches allow rearset users to operate the rear brake light. This all-in-one unit replaces the banjo bolt that connects the rear master cylinder to the rear brake line. You simply replace the bolt with this assembly and splice the wires into your existing brake light switch. The pressure inside your brake system then activates the brake light.
$31.95